---

​Drinking Water Sanitation aboard Ships
Cargo Ships, Bunker Ships, Yachts, Cruise Liners, Ferry Boats

BlueSense™ technology developed OXAQUA Inline and OXAQUA RW, a reliable and sustainable drinking water disinfection technology especially adapted to the needs of the maritime industry.
Based on enhanced water electrolysis principle and benefiting from over 15 years of experience in the shipping and cruise lines industries, OXAQUA range can be easily fitted aboard any kind of vessels.
Disinfectant will be generated using the chloride ions (Cl-) naturally present in the water to be treated. Providing their concentration is above 20 ppm, no addition of chemical precursor would be necessary to generate a free chlorine residual up to 2ppm.
(If below 20ppm Cl-,  low addition of sodium chloride can be proposed in option (brine tank)

In the form of a strong oxidizer, hypochlorous acid (HOCl), this sanitization will prevent the spread of a wide spectrum of microorganisms (bacteria, viruses, algae, fungi or molds) and in particular of pathogens such as Coliforms or Legionella Pneumophila.

BlueSense™ Electrolysis Cell

OXAQUA​​ inline will sanitize water directly in the piping systems (for boats using  hydrophore) on flow rates up to 10 m³/h.
OXAQUA RW will be placed in side-stream of the drinking water tanks and its electrodes activated only when the oxidizer residual is reaching a low level (Built-in chlorine analyzer provided in option).

KEY ADVANTAGES :

• Directly installed on existing networks

          - Inline, or on a recirculation loop using integrated pump

• Chemical free drinking water disinfection

         - Equipment based on water electrolysis
         - No chemical product required
         - Only need 20ppm of chlorides to generate up to 2ppm free chlorine 

• Sanitized water up to the tap
• Fully automated - Low maintenance
• Minimum footprint -  Easily fitted in existing installations
• Adapted for Retrofitting of existing treatment processes
• Low energy consumption

          - Maximum power consumption: 1 kW (OXAQUA RW)

• Various treated Flow rates (1, 2, 3, 5 & 10 m³/h)​

BlueSense™ OXAQUA RW

​
​SUPPLY SCOPE: 

• Control cabinet (220VAC), powering the electrolysis cell at maximal 24 VDC/6A

​          - Single start button.
          - Default alarm LED

• Air relief valve assembled on the highest point of the cell to remove the gas potentially produced during the electrolyse (H2).
• Flow switch output on/off signal
• Electrodes.

         - Assembly of plates with proprietary and exclusive coating
         - In a 63 mm transparent PVC-pipe
         - Provided with standard 63 mm PVC coupling connections​
​
OPTIONAL FEATURES :

• Circulation pump voltage 220 VAC, 50 Hz (Oxaqua RW)
• Inline free-chlorine-measurement-system ​(Oxaqua RW CL)
• PVC panel on which all the equipment is skidded to facilitate its implementation on a wall or on a frame.

---