BlueSense™ Chlorine Dioxide generation
|
In certain parts of the world, the quality of the drinking water supply through the public network can be unkown. Contamination by bacteria and other harmful micro-organisms is prevalent.
BlueSense™ developed OXIBLU, specifically designed to provide a final disinfection at the end-user's tap. On Site Chlorine Dioxide generation Based on the electrolysis principle, OXIBLU is a patented technology, to be either integrated into water coolers or dispensers or use as a stand-alone unit (in this case with its exclusive electronic controller). Using only the chlorides ions naturally present in the water (a minimum concentration of only 20 ppm is required), OXIBLU will generate up to 1.2 ppm of Chlorine Dioxide. Chlorine dioxide is one of the most effective disinfectants, rapidly killing bacteria, viruses, fungi and algae. Its efficacy has been proven at concentrations as low as 0.1 ppm (parts per million) and over a wide pH range. It is also highly soluble (10 times more than chlorine), even in cold water which makes it extremely effective. Unlike the other forms of chlorine, chlorine dioxide is also efficient against biofilm which can form into pipes, tanks and equipment and create a danger to drinking water quality.
It will provide a final disinfection, bringing clean water all the way to the tap.
Typically, OXIBLU is able to treat up to 2 liters/min (0.53 US Gal./min), a flow rate appropriate for most requirements. |
A flexible solution In addition to the OXIBLU device, BlueSense™ can also provide a complete unit, including the electronic circuit board and a specific enclosure to allow a stand-alone installation directly on the inlet water pipe of a household or on a small drinking water dispensing unit.
Maintenance of the unit is facilitated by an exclusive sliding system (ESS) which requires only 2 minutes to perform the electrode replacement. For large quantities, BlueSense™ engineering services can provide tailored solutions for specific requirements. Oxiblu exclusive sliding system
|
OXIBLU - Technical Specifications :
|
|
BlueSense™ OXIBLU simplified scheme
|
Examples of application:
Downloadable Product Information Sheet: 
| ||
BlueSense™ OXIBLU 500 - 5 online Electrodes
OXIBLU - flexible solutions for higher water volumes
BlueSense™ has also developed units based on OXIBLU electrodes technology that produce up to 1.0 m3/h :
The device is built with 5 to 10 electrodes in parallel and can be adapted to the existing flow rate. It is easy to install with a very low replacement cost.
OXIBLU 500 : 0.5 m3/h
OXIBLU 1000: 1.0 m3/h
Examples of application:
BlueSense™ has also developed units based on OXIBLU electrodes technology that produce up to 1.0 m3/h :
The device is built with 5 to 10 electrodes in parallel and can be adapted to the existing flow rate. It is easy to install with a very low replacement cost.
OXIBLU 500 : 0.5 m3/h
OXIBLU 1000: 1.0 m3/h
Examples of application:
- Roof Top Tanks
- Small Cooling Towers (Evapo-condensers)
- Animal Drinking Water Lines (poultry, cattle, etc.)
OXIBLU Drinking Water Solutions
BlueSense™ OXIBLU
|
BlueSense™ OXIBLU 500/1000
|
BlueSense™ OXIBLU 1000
Modular Solution
|
