---

Drinking Water Supply for Emergency Relief and Military Deployment

BlueSense™ developed a large range of drinking water disinfection solutions based on a patented process. The process produces a strong oxidizing santizer, using chlorides naturally present in the water, without adding any chemicals.
A minimum of 20 ppm chlorides is necessary, in the water to be treated, to ensure proper generation of hypochlorous acid or of chlorine dioxide. For waters with lower concentration, brine production equipment can be proposed by BlueSense™.

Offering a large range of water care solution (from a few liters to 240 m3/day), our solutions do not require any specialised skill and only very little maintenance is needed.

​They are easily deployable on site and adaptive to available water quality. They produce either immediate disinfected drinking water or a disinfecting solution to treat large volumes of water.

BlueSense™ emergency relief solutions have been successfully used by Non Governmental Organisations and armies, to provide a sustainable access to drinking water to people impacted by natural disasters or in refugee camps. BlueSense™ products were used for example in Haiti after the 2010 earthquake or in the Philippines after the 2004 tsunami.

OXIMOBI 600 operating Scheme

​Key Benefits

• Large range of flow rates (from a few litres to 240 m3/day)
• Low or even no addition of salt
• No specialized skill and very little maintenance required (long lifecycle)
• Easily deployable on site for emergency relief
• Adaptive to available water quality

Applications

• Drinking water

          - Immediate sanitation for natural disaster relief
          - Specific units for long term supplies (refugee camps)
          - Military deployment

• Mobile clinics or hospitals

          - Disinfection of hard surfaces (surgery blocks, medical instruments)
          - Production of multipurpose disinfection solution
          - Disinfection of black waters before discharge

Product Range

OXISTICK for remote water supplies :
Lifecycle : 8,000 hours operation
Powered by a car battery or a solar panel (not included)
Production of :

• Disinfected drinking water immediately from buckets of filtered water

          - No salt needed, using the natural chlorides from the water
          - 20 ppm chlorides concentration is required

• Disinfecting solution to treat large volumes of water

          - 10 hours to produce 10 litres of 0.5% chlorine solution to treat 50 m3
          - Using 30g salt (NaCl) per 10 litres

BlueSense™ OXISTICK

OXIMOBI 600 for emergency first relief :

• 600 litres/day of drinking water

• Working principles

          - Filtration of the water (ceramic filter - 0.22 µm absolute)
          - Electrolysis cell
          - Solar panel (optional) or 12V car battery or VAC 220

• Needs water with :

          - Turbidity < 20 NTU
          - Chlorides > 20 ppm
​Treats drinking water for approx. 300 people/day.
Exists in wall-mounted devise or autonomous Flight Case version.

BlueSense™ OXIMOBI 600

BlueSense™ OXIMOBI 600 Flight Case

OXIMOBI 3000 for sanitized water on a sustainable way

• Autonomous mobile drinking water disinfection system
• Average  3,000 litres per hour treated

• Fully skidded unit on a robust stainless steel frame
• Floating pump 110/220 VAC with pre-filtration (20m hose supplied)
• Buffer tank of feed water to be supplied by customer
• 2 Ultra-filtration membranes with associated valve assembly
• Backwash pump
• Electrolysis system with proprietary electrodes
• Electronic control box (24 VDC/4A) controlled via micro-processor and PLC (Programmable Logic Controller) to ensure reliability and quality of the water supply

​Can treat water with turbidity up to 100 NTU.
No chemical needed for daily operation.
Using naturally present chlorides in the water to generate disinfectant (at least 20 ppm chlorides is required)

BlueSense™ OXIMOBI 3000

---

Share this on LinkedIn